Qualcraft Skyhook Manual do Utilizador descarregar pdf (Página 9)

FALL CLEARANCE CALCULATION

Lanyard length

(6’ total)

Safety factor

(3’ total)

Deceleration

distance (4’ total)

Height of harness

dorsal D-ring from

worker’s feet

(6’ total)

Required

distance

from

anchorage

(19’ total)

Limitations

Fall Clearance: There must be sufficient clearance below the anchorage connector to arrest a fall

before the user strikes the ground or an obstruction. When calculating fall clearance, account for

a MINIMUM 3’ safety factor, deceleration distance, user height, length of lanyard/SRL, and all

other applicable factors. Diagram shown is an example fall clearance calculation ONLY.

Swing Falls: Prior to installation or use, make considerations for eliminating or minimizing all

swing fall hazards. Swing falls occur when the anchor is not directly above the location where a

fall occurs. Always work as close to in line with the anchor point as possible. Swing falls

significantly increase the likelihood of serious injury or death in the event of a fall.

Guardian Fall Protection 6305 S. 231st St., Kent, WA 98032 phone: (800) 466-6385 fax: (800) 670-7892 www.guardianfall.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

Sem comentários

Qualcraft Skyhook Manual do Utilizador Página 9